Excavator Attachments
-
GP Bucket for General Duty Work
Crafts excavator general purpose bucket is made of normal standard thickness steel plate, and there is no obvious reinforcement process on the bucket body. It is designed from 0.1m³ to 3.21m³ and is available in all widths for 1t to 50t excavators. Large opening size for large pile loading surface, general purpose excavator bucket has the advantages of higher filling coefficient, high work efficiency, and low production cost. Crafts own design general purpose bucket is able to transmit your excavator digging force better, meanwhile, each excavator brands’ original designs buckets and OEM service are all available for your choice. According to the work condition, there are also three other weight classes available for Crafts excavator buckets: heavy duty bucket, extreme duty bucket and ditching cleaning bucket.
-
Pin Grab Type Tilt Quick Couplers
Crafts tilt quick coupler is the pin grab type quick coupler. The tilt function makes the quick coupler like some kind of a steel wrist between the excavator arm and the top-end attachments. With a swing cylinder connecting the quick coupler top part and the bottom part, the tilt quick coupler is able to tilt 90° in two directions (180° tilt angle in total), which make your excavator attachment make your attachment possible to find a suitable angle to ease your tasks, such as reduce waste and manual labor when filling pea gravel around pipes and manholes, dig at the sides of deep trenches or under the pipes, and some other special angle excavation that the normal quick coupler can’t reach. Crafts tilt quick coupler is able to suit to 0.8t to 36t excavators, almost cover all the popular ton range of the excavators.
-
Excavator Mechanical Pulverizer for Concrete Crushing
Crafts mechanical pulverizer is able to crush through reinforced concrete and cut through light steel. The mechanical pulverizer is made of high strength steel and the wear resistant steel. It requires no extra hydraulics to operate. The bucket cylinder on your excavator would work on its front jaw to crush materials against the stationary back jaw. As an ideal tool on the demolition site, it is able to separate concrete from rebar for recycling use.
-
Excavator Rake for Land Clearing and Soil Loosing
Crafts rake would turn your excavator into an efficient land clearing machine. Normally, it is designed to 5~10 pieces tines, standard width and customized width with customized tines quantities are available on require. The tines of the rake are made of high-strength thick steel, and are able to stretch far enough to load more debris for land cleaning or sorting. According to your target material situation, you can choose whether put the casting alloy teeth on the tips of the rake tines.
