Products
-
Durable Idlers and Track Adjusters for Heavy Equipment
Crafts idler and track adjuster are manufactured according to the standard of OEM. Made from round steel, the idler main pin shaft will be hardened by the mid frequency hardening heat treatment to ensure its hardness. Meanwhile, the idler shell is casted by special steel.
-
Reliable Performance with Our Sprockets and Segments
Crafts sprockets and segments are manufactured according to the standard of OEM. All of Crafts sprockets and segments are casted by special steel, to make sure they are strong enough to bear and transmit the hydraulic power. And they are made in four processes: first, make mound, cast to produce sprockets and the segments, this process help us get the rough sprockets and segments ;
-
Track Links
Crafts track links are manufactured according to the standard of OEM. All of Crafts track links are forged by special steel 35MnB. Comparing to other track links which made of 40MnB or 40Mn, our track links are better in toughness and abrasive resistance.
-
Hydraulic Breaker Parts Perfectly Fit to Soosan Hydraulic Breakers
To make sure we can understand what parts that you need exactly for your breaker, please find the parts number and name according to the following breaker profile chart and the breaker spare parts listing. Then please show us its name and your required quantity.
-
Pin Grab Type Tilt Quick Couplers
Crafts tilt quick coupler is the pin grab type quick coupler. The tilt function makes the quick coupler like some kind of a steel wrist between the excavator arm and the top-end attachments. With a swing cylinder connecting the quick coupler top part and the bottom part, the tilt quick coupler is able to tilt 90° in two directions (180° tilt angle in total), which make your excavator attachment make your attachment possible to find a suitable angle to ease your tasks, such as reduce waste and manual labor when filling pea gravel around pipes and manholes, dig at the sides of deep trenches or under the pipes, and some other special angle excavation that the normal quick coupler can’t reach. Crafts tilt quick coupler is able to suit to 0.8t to 36t excavators, almost cover all the popular ton range of the excavators.
-
Excavator Mechanical Pulverizer for Concrete Crushing
Crafts mechanical pulverizer is able to crush through reinforced concrete and cut through light steel. The mechanical pulverizer is made of high strength steel and the wear resistant steel. It requires no extra hydraulics to operate. The bucket cylinder on your excavator would work on its front jaw to crush materials against the stationary back jaw. As an ideal tool on the demolition site, it is able to separate concrete from rebar for recycling use.
-
Excavator Rake for Land Clearing and Soil Loosing
Crafts rake would turn your excavator into an efficient land clearing machine. Normally, it is designed to 5~10 pieces tines, standard width and customized width with customized tines quantities are available on require. The tines of the rake are made of high-strength thick steel, and are able to stretch far enough to load more debris for land cleaning or sorting. According to your target material situation, you can choose whether put the casting alloy teeth on the tips of the rake tines.
-
Hydraulic Thumb for Picking, Holding and Moving Awkward Materials
There are three types of hydraulic thumb: mounting weld on type, main pin type, and the progressive link type. The progressive link type hydraulic thumb has the better effective operating range than the main pin type, while the main pin type is better than the mounting weld on type. In terms of the cost performance, the main pin type and the mounting weld on type is much better, which make them more popular in the market. At Crafts, the width and tines quantity of the thumb could be customized according to your requirement.
-
H-Links & I-Links for Excavators
H-link & I-link are the necessary ASSY accessory for excavator attachment. A good H-link & I-link transfers the hydraulic force very well to your excavator attachments, which can help you finish your work better and more efficient. Most H-links & I-links in the market are the welding structure, at Crafts, casting is available, especially for the large ton machines.
For more information, please feel free to contact us.
-
Rock Bucket for Heavy Duty Work
Crafts excavator heavy duty rock buckets takes thicker steel plate and wear resistant material to reinforce body such as the main blade, side blade, side wall, side reinforced plate, shell plate and rear strips. In addition, the heavy duty rock bucket takes the rock type excavator bucket teeth in stead of standard blunt type for better penetration force, meanwhile, replaces the side cutter into the side protector to withstand the impact and the wear for the side blade.
-
Mechanical Thumb for Picking, Holding and Moving Awkward Materials
Crafts mechanical thumb is an easy and cheap way to help your machine get the grab function. It is fixed and unmovable. Although there are 3 holes on the weld on mount to adjust the thumb body angle, the mechanical thumb is not so flexibility as the hydraulic thumb on grabbing. Weld on mounting type is the mostly choice in the market, even if the main pin type is available, seldom people choose this type due to the trouble when equip the thumb body on or off.
-
Excavator Heat Treated Harden Pins & Bushings
Bushing refers to a ring sleeve that is used as a cushion outside mechanical parts. Bushing can play many roles, in general, it is a type of component that protects the equipment. Bushing can reduce equipment wear, vibration and noise, and it has the effect of preventing corrosion as well as facilitate the maintenance of mechanical equipment.